EnGenius ECB9500 Uživatelský manuál stáhnout pdf (Strana 9)

Multi-Function Gigabit Wireless-N Client Bridge Version 1.0

2 Understanding the Hardware

2.1 Hardware Installation

1. Place the unit in an appropriate location after conducting a site survey.

2. Plug one end of the Ethernet cable into the LAN port of the device and another end

into your PC/Notebook.

3. Plug one end of another Ethernet cable to WAN port of the device and the other end

into you cable/DSL modem (Internet)

4. Insert the DC-inlet of the power adapter into the port labeled “DC-IN” and the other

end into the power socket on the wall.

This diagram depicts the hardware configuration

2.2 IP Address Configuration

This device can be configured as a Bridge/Router or Access Point. The default IP

address of the device is 192.168.0.1 In order to log into this device, you must first

configure the TCP/IP settings of your PC/Notebook.

1. In the control panel, double click Network Connections and then double click on the

connection of your Network Interface Card (NIC). You will then see the following

screen.

Client Brid

PC, Cable/DSL

Modem

Power Outlet

Ethernet

AC/DC cable

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 70 71

Žádné komentáře

EnGenius ECB9500 Uživatelský manuál Strana 9